FSN MSV 2, Руководство пользователя

Страница: 12 / 81

FSN2016 – 9/2019
12
4.2.5 Resolution
MSV2 supports output resolution of 4K(4096x2160p@60), 1080P.720P and more.
(See Chapter 5 for detailed output resolution of MSV2 Function)
When the Resolution button is pressed, the currently set output resolution is displayed
on the screen banner, and you can change the output resolution by pressing the
resolution button again before the banner disappears (Timeout: 5sec).
The output resolution supported by MSV2 is only capable of setting the resolution
supported by the connected display equipment.
4.2.6 Layout Button
You can select Quad, 3 side, 3 bottom, Channel 1-4 only mode, and User 0 to 4 mode
from the front panel. The button LED is illuminated for layout shown on the current
screen. User mode is set to User 0 layout when the User button is pressed. Press the
1,2,3,4 button to set the user 1,2,3,4 layout. Press the User button again to set User 0
layout. If the same CH button is subsequently pressed again, it will change to CH only
mode.
4.2.7 Factory Reset
Pressing the User button while holding down the power button enters Factory reset
mode and the power button red LED flashes. The message “Factory Reset" will be shown on
screen. When Factory reset is shut down, a red LED illuminates on the power button.
Press the power button to boot MSV2 again.
4.2.8 Swap
By pressing Up and Down on all presets (except channel only mode when Move, Resize,
and Menu are not enabled), the swap function is activated.
Swap function is automatically turned off when the preset is changed.