FSN MSV 2 Скачать руководство пользователя страница 11

Страница: 11 / 81

FSN2016 – 9/2019

4.2 Basic Function

4.2.1 Power On/Off

1. The front MSV2 power button LED will illuminate red when the rear power switch is switched on.

2. When the power button is pressed, the blue LED flashes and starts booting

3. The power button LED will turn blue after boot.

4. If the power button is pressed for more than 3 seconds, the red LED on the power button

flashes and a Power off banner is displayed on the screen. The red LED illuminates when
MSV2 is fully shut down.

4.2.2 Menu - OSD

Press the Menu button to display the OSD Menu. Press the Menu button again to exit

the OSD Menu and disappear from the screen.

You can operate MSV2 settings and basic functions on the OSD.

Check the OSD Chapter for more information.

4.2.3 Move

1. Press Move Button, LED will light up and Move function will be activated

Select the number of window you want to configure by pressing one of 1,2,3 and

4 button, when a screen is selected LED above number button will light up

) and right ( ) buttons

4. You can select any window while repositioning just by pressing 1, 2, 3 and 4 buttons.

5. After setting, press the OK button to save your changes and press the Move button again to

disable the function without saving.

4.2.4 Resize

1. Press Resize Button, LED will light up and Resize function will be activated

2. Select the number of window you want to configure by pressing one of 1,2,3 and 4

button, when a screen is selected LED above number button will light up

Resizing

) and right ( ) buttons

4. You can select any window while resizing just by pressing 1, 2, 3 and 4 buttons

5. After setting, press the OK button to save your changes and press the Resize button again to

disable the function without saving.

Содержание MSV 2


















































































Результаты поиска

Содержание MSV 2

Отзывы:

Похожие инструкции для MSV 2

Бренды по названию

Популярные бренды

FSN MSV 2, Руководство пользователя

Результаты поиска

Содержание MSV 2

Отзывы:

Похожие инструкции для MSV 2

Бренды по названию

Популярные бренды