FSI DAT QE Series, Инструкция по эксплуатации

Страница: 19 / 27

19
FSI # DAT® QE SERIES® Patent Pending ‘ Quick Erect ’ SHELTER SYSTEMS
GENERAL SPECIFICATIONS
Canopy:
Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. 230GR/Sq. M + or
-
5 % (approx.
192.3gr/sq.y ard
-
6.78 ounce)
-
UV/chemical resistant/fire retardant – Rated Ultra Violet Protection (UPF) of 50+ where ASTM D6603 states a
UPF of 40+ is rated Excellent; and water repellent w. a hydrostatic resistance of 250 psi +
-
Anti fungus/Mildew resistant to meet and exceed
US Fed. Test MIL.STD.810E 508 and ASTM G 21
-
96 (2002); Water Resistance (ISO 811 (E) 1981, hydrostatic pressure test at water pressure
600 m/min. = 5540; Tensile Strength (ISO 13934
-
2: 1999 C.R.E. Method in N)
-
warp = 1300
-
weft = 1500; Tear Strength (ISO 13937
-
1:2000,
Pendulum method)
-
Warp = 25 Weft = 43; Burst Strength (ASTM 0 3787:2001, C.R.E. Ball bursting method N) = 1620; Seam Strength (ISO
13935
-
2: 1998, Grab method N) Sewing threads fail at 710; Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test
CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘ A ’ burn scale rating, Japan JIS A 1322: 1966, Meth
-
od A. All
seams double stitched and coated both sides.
Inner Canopy:
If applicable
-
of 100% NYLON 210T ANTRON W/R, POLYURE
-
THANE COATED 57/58”, Color: White
-
Flame Retardant to
meet ‘ NFPA
-
701 TM
-
1 ’, Anti
-
fungus/Anti
-
mildew, opaque
Floor:
1,000 dtex 0.58mm Nylon coated w. PU, tensile strength: 2545N/2360, Tear Strength: 106/102N, weight: 660 grams per sq. mm 60” W.
Standard color is ‘ FSI Blue ’ ®. Red, Green, White and Tan/Sand also available as standard. Other colors offered P.O.A.
Frame/Hub:
New patent pending Hub design that is far more durable, and stable, and easier to assemble or replace as needed. DAT QE
Frame/Hub Material Specifications:
Hub is of forged high density poly
-
fibers
Frame Dimensions:
Outer Diameter: 15.72±0.25
Wall Thickness: 1.68±0.25
Carbon Content: 25±2.0%
Specific Gravity: 1.8~2.1
*All testing below use ASTM and National Test standards
Mechanical Properties:
Tensile Strength (ASTM D638, National GB1447
-
83): L=3000~5200 KG/Cm²; T=2000~5000 KG/Cm²
Tensile Modulus (ASTM D638, National GB1447
-
83): L= 3.8~6.7×10
5
; T= 1.5~6.0×10
5
KG/Cm²
Flexural Strength (ASTM D790, National GB1449
-
83): L= 3000~6200; T=2500~5000 KG/Cm²
Flexural Modulus (ASTM D790, National GB1449
-
83): L=4.9~12.6X10
5
; T=1.8~10.6X10
5
KG/Cm²
Compressive Strength (ASTM D695, National GB1448
-
83): L=2000~4000; T=1480~3480 KG/Cm²
Shear Strength (ASTM D732, National GB1450
-
83): L=4540~8600; T=2540~6600 KG/Cm²
Izod Impact Strength (V Type) (ASTM D256, National GB1451
-
83): L=250~900; T=200~700 KG.CM/ Cm²
Electrical Properties:
Volume Resistance (ASTM D257, National GB1410
-
78): 10
12
~10
15
Ω. CM
Surface Resistance (ASTM D257, National GB1470
-
78): 10
12
~10
15
Ω
Dielectric Constant (ASTM D150, National GB1409
-
79): 3~5
Dissipation Factor (ASTM D150, National GB1409
-
79): 0.05
Breakdown Voltage (ASTM D149, National GB1408
-
78): 13~40 KV/mm
Arc Resistance (ASTM D495, GB1411
-
78): 60~80(S)
QE SERIES® ‘ Quick Erect ’ General Set up and Tear down Instructions:
All parts are pre
-
assembled with no special tools required. All components are of interconnected scissor type connected expansion frame
components.
To ‘ Quick Erect ’ simply have 2
-
4 support personnel grip side frame on each side. Pull the width support frames slowly – and then ease roof
frame upwards with the push poles until locked in place. Check and final position canopy and floor. Commence use.
Standard color is ‘ EMS ’ Blue exterior w. high visibility white inside color. Green, White, and Tan/Sand exterior canopy color also available at no
extra cost. Other colors available P.O.A.
All Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, tie down ropes and 4
D
-
rings to tie off to, repair kit, manual, shelter sleeve, 2 upper air vents, and a hammer. All canopy walls are above and attached to the frame
and flooring for air lock, and reflective striping is found on the upper air vents above doors. Units can attach to a second shower or FSI shelter.
Simply unfold/pop up the unit and commence use in less than 5 minutes (size of shelter dependent).
Every FSI DAT ® QE series ® shelter comes complete w. no charge redundant features allowing for
-
hanging undress/redress kits etc. on the
inlet and outlet side.
All DAT ® QE series ® shelters available with cross and center divider curtains, side doors, extra windows, skylights, HVAC/clothing ducts with
ties, etc. as offered in published FSI price lists and at www.fsinorth.com Multiple optional accessories available inclusive of air heaters, air
coolers, elevation grids, waste water pumps, etc. available.
FSI DAT ® QE series ® shelter MODEL DETAILS AS BELOW
Measured inside to inside
-
outside to outside add approx. 1.5 Ft. per dimension.
Patent pending retractable carbon composite tubing shelter with canopies, floors, carry sleeves/bags just as with FSI DAT® series air inflatable
products
--
see detailed specifications