12
Storage:
Allow your air tent to dry thoroughly in the shade or inside before storing, never in bright
sunlight. Store your air tent, while drying, in a cool, flat and dry place (in as close to room
temperature conditions as possible) with some air in the air berms if at all possible. If the
above is not possible, empty the air tent of air completely and roll it up loosely, to allow for
drying.
Cleaning:
The surface of the unit should be cleaned with a solution of mild soap and fresh water after
each use. To avoid abrasion and wear, be sure that all the sand, small rocks, oil and dirt have
been removed from the air berm surfaces, with attention paid to the floor areas nearest the
vertical air berms.
** WARNING: NEVER USE PETROL OR SOLVENT FOR CLEANING
TROUBLESHOOTING / REPAIRS
Your FSI shower/shelter should provide a long and trouble free operational life span. It
has been designed such that no spares need be kept other than consumable items and
accessories you may elect to purchase. However, under certain circumstances the
potential exists for issues to occur; and their identification and possible rectification are as
listed below:
INFLATABLE BERM LEAKS:
Identified by the FSI unit collapsing with time. A
“
hissing
”
sound might be heard if leak is
severe.
Maintenance:
Clean your unit with fresh water and a mild detergent soap.
When you intend to store the unit for a long time without use, we would recommend you
establish a protocol to inflate it monthly and check if it all is as originally left.
