water (i.e. The guy at the pool
shop is not going to cut it). We
have access to high quality
testing equipment and frequently
test our units and conduct
research. If you feel that there is
an issue with your pH, please
contact us.
2. Check that the system is
connected as per the schematic
diagram on the rear of this
manual.
Hot Water has been run through
the filter
Reverse Osmosis units are
designed for cold water only. If
you accidentally run hot water
through the membrane for a
short period of time, it may still
undamaged. What will happen in
the pore size in the membrane
will expand and allow more
contamination through. Run the
unit on cold water for 15 minutes
and test to make sure there is no
issues.
Replacement Filters & Parts
Filter Cartridges:
GT6-21S
Inline Activated Carbon Filter (Pre-Filter)
6 Months
GT5-12S-350
Refill bag of DI Resin
As Required
GT6-18LS
Inline Carbon Calcite Post Filter
GT13-59-ALP
50GPD Reverse Osmosis Membrane
1 – 4 years
Fittings:
(TDS Testing Required)
GT10-22LS
¼” Male x ¼” Tube Fitting
GT10-23LS
¼” Male Elbow x ¼” Tube Fitting
GT10-2LS
1/8” Male x ¼” Tube Fitting
GT10-13LS
1/8” Male Elbow x ¼” Tube Fitting
Valves:
GT25-3S1/4
Kitchen Tap Diverter Valve ¼”
GT25-15
Male x Male Thread Adapter 22 – 24mm
GT13-1S
200CC Flow Restrictor ¼”
GT15-33G + GT14-2LS
Laundry Block Adaptor
GT10-31-DM
¾” Outdoor Tap Adaptor.
Housings:
GT8-31
1812 Membrane Housing
Diagrams
Continue Over Page
