FSA GT1-26-5, Быстрый старт

Страница: 2 / 14

Page | 2
Technical Overview
I. Important Notes
For correct operation of this appliance, it is essential to observe the manufacturer’s instructions.
Installation must be carried out by a qualified plumber or authorised technician to comply with Australian
Plumbing Codes. This RO system is certified to WaterMark Standards AS/NZS 3497 Under the Certificate
number 23247. WaterMark certification is the level of certification required by law for a licensed plumber in
Australia to install a water filter system.
You will find most answers to your queries can be found in this instruction manual – please
thoroughly read through this manual from front to back including the troubleshooting page before
contacting customer support.
II. Before You Purchase/Open
The system requires specific working conditions to be met before installation. If these conditions are not
met, the system may not be suitable for the application and may not function as specified.
Feed Water
Conditions Min Max
Inlet Pressure 350 kPa 700 kPa
Temperature 4.5°C 38°C
pH Level 2 11
TDS 0 mg/L 2,000 mg/L
Iron 0 mg/L 0.3 mg/L
Manganese 0 mg/L 0.1 mg/L
Hardness 0 mg/L 200 mg/L
III. Space Requirements
System Dimensions (5 Stage)
Height: 43cm
Width: 37cm
Depth: 21cm
Storage Tank Dimensions (12L)
Height (With Stand): 42cm
Height (No Stand): 38.5cm
Width: 27cm
IV. Before You Begin Installation
All components that come pre-assembled will need to be thoroughly checked before installation. Due to
transit, fittings and other components may be loosened or unseated – ensure fittings, tubing and filters are
inspected before continuing.
V. What is Reverse Osmosis
Reverse osmosis is a process that uses a semi permeable, spiral wound membrane to separate and
remove dissolved solids, organics, pyrogens, colloids and bacteria from water. The Feed water is delivered
under pressure at 50psi or above through the permeator where the water permeates the minute pores of
the membrane and is split into purified water which is delivered to the tap, and concentrate (reject) water
which is sent to waste. Reverse Osmosis is capable of removing 85 – 99.99% of a large range of solids
from water (depending on the solid) along with Organics and Bacteria.