4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL
2.3 Layer 2 Features
n
Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
n
Integrates address look-up engine, supporting 2K absolute MAC addresses
n
9K jumbo packet support
n
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
n
IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
n
Automatic address learning and address aging
2.4 Case and Installation
n
No external power cable installation required
n
Made of metal, desktop size design
n
Wall-mountable, Plug-and-Play installation
n
0 ~ 50 degrees C operating Temperature
Note:
PSE (power sourcing equipment)
is a device (switch or hub for instance) that will provide power in a PoE setup. The maximum
allowed continuous output power per such device in IEEE 802.3af is 15.4 watts and in IEEE 802.3at is 30 watts.
PD (powered device)
such as IP phone, network camera or wireless access point is a PoE-enabled terminal that consumes energy
supplied by PSE.
2
3. Product Specifications
Model
POEX4
Hardware Specification
PoE In Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” in
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” out
auto MDI/MDI-X, auto-negotiation RJ45 connector