5
EN
Installation Requirements
Keep the power off during the installation.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and
is well grounded.
Use only the power cord provided with IP PBX.
Make sure that the supply voltage matches the specifications indicated on the rear panel of IP PBX.
Confirm not to bring about the overload of power circuit before turning on the power of IP PBX, to
avoid the unnecessary damage.
To avoid the electric accident, do not open or remove the cover of IP PBX when it is working as well
as off the power.
Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and
never use any other liquid cleaning method.
Back Panel
Ports
Description
Power Switch
Power Connector
PWR Button
WAN Port
LAN Port
HDMI Port
USB Port
Audio In/Out
Module Slots
Switch the power on or off
100-240V AC power
Shutdown/Turn on the IP PBX system with power connection
10/100/1000Mbps
10/100/1000Mbps
For video output
For USB keyboard or USB storage
For external paging
For FS Telephony Module Cards
Back Panel Ports
SLOT2
SLOT1
USB
HDMI
LAN
WAN
PWR
Power Switch
Power Connector
PWR Button
WAN Port
LAN Port
HDMI Port
Audio In/Out
USB Port
Module Slots
PWR
SYS
