9
Configuring the IP PBX
Path:
Maintenance -> Diagnostic -> PING
The ping command is a very common method for troubleshooting the accessibility of devices. It uses a
series of Internet Control Message Protocol (ICMP) Echo messages to determine:
Specify the domain or IP of the host you want to contact, then click on
Start
button, and then the
command begins to process. You will receive results output from the system indicating the
reachability of the destination.
Troubleshooting
PING
EN
After going through the quick installation wizard, system will reboot for new settings taking effect.
Please wait about 2 minutes and refresh the Web page, then you'll see the login screen like below.
The admin user name and password are defined by during the installation wizard process. If you have
skipped the wizard, you’ll need to login with default username and password which are both “admin”.
Once you have modified the network profile during the quick installation wizard or after admin login,
then you can power off and deploy the IP PBX system to your local LAN, and then power it on for
further configurations.
Whether a remote host is active or inactive.
The round-trip delay in communicating with the host.
Packet loss.
English
Sign in
IP Phone System
Google Chrome Recommended
