FS FHOM-103 Скачать руководство пользователя страница 11

Страница: 11 / 12

More power

Insufficient battery power

13. Battery Charge

When you use rechargeable batteries and the meter indicates insufficient power, it

should be turned off and charged. Long time under voltage will cause the life of the

battery to be shortened.

When charging, the battery indication on LCD will flash. After charging fully, the

indication will stop flashing and show full. Don't charge for more than 48 hours.

If charging while using the device, the time will be longer.

Rechargeable batteries must be in device when you use the AC/DC adaptor for charging.

And do not charge the non-rechargeable batteries, or the device will be destroyed and

also lose the guarantee.

Sufficient power

Less power

Long press button to save the current value.

8. OLS On/Off

Press button to turn on/off the laser source output.

9. OLS - Select Wavelength/WAVE ID

Short press button to shift the wavelength. Long press (>2s) the button to turn on

WAVE ID function, the wavelength glints on LCD. Long press it again to turn off the

function.

10. OLS - Modulation Select

Press button to shift from 270Hz, 1KHz, 2KHz.

11. Visual Fault Locator (optional)

The instrument can be built in an optional VFL module. Press button to shift the

conditions: on-> glint-> off.

12. Battery Energy Detect

Save

VFL

MOD

Laser

Содержание FHOM-103













Результаты поиска

Содержание FHOM-103

Отзывы:

Похожие инструкции для FHOM-103

Бренды по названию

Популярные бренды

FS FHOM-103, Быстрый старт

Результаты поиска

Содержание FHOM-103

Отзывы:

Похожие инструкции для FHOM-103

Бренды по названию

Популярные бренды