Installation Requirements
Heat Shrinkable
Protective Sleeve x24
Built-in Splice Tray
Nylon Tie x10
Seal Tape x1
EN
2
To ensure the technical requirements, the following instructions must be
followed:
The fibers in the FOST are spliced and installed orderly.
The curved diameter of fiber meets with the technical requirements.
The internal tighteners are tightened.
The inlet/outlet ports without fiber cables must be blocked up with the port plugs.
Control the amount of seal tape within a proper range.
Seal fitting is installed neatly and smoothly.
M4 Screw x2
M4 Nut x2
Labeling Paper x4
1 2 3 4 5 6
1 2 3 4 5 6
