3-1
FRYMASTER PF95LP PORTABLE FILTRATION SYSTEMS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3.1 Assembling The Filter System
On initial installation and before each use, remove all loose parts from the filter (if present),
wash the filter pan and all accessories in hot, soapy water and dry thoroughly.
WARNING!
Water or boil-out solution
MUST
not be allowed to drain into the filter pan or
filter system. Irreversible damage will result if water is allowed into the
system, and the warranty will be voided.
The PF95LP filtration system utilizes a filter-support grid, filter paper and a hold-down ring
to secure the filter paper in place.
3.1.1 Filter Paper Configuration
See illustration for proper
assembly.
1.
Filter Pan Cover
2.
Hold-Down Ring
3.
Filter Paper (1 sheet)
4.
Screen/Support Grid
5.
Filter Pan Assembly
1
2
3
4
5
A.
First, place the support grid in the bottom of filter pan.
B.
Put one sheet of filter paper on top of the support grid. Be sure the paper covers the
whole filter pan bottom.
C.
Position the hold-down ring on top of the filter paper and latch the hold-down ring and
filter paper securely against the filter pan bottom, forming a tight seal.
