8. CAUTIONS
Pay attention to the following instructions to use this Gresase Remover machine.
TAKE INTO ACCOUNT THE WORKING ENVIRONMENT
- Place the remover machine over a flat surface.
- Do not install it in a wet or dusty place.
- The machine is not thought to be working outside or without light.
- Do not expose the grease remover to the rain.
- Do not use it near liquids or inflaming gases.
-Keep tidy your working enviroment; in that way, you will avoid possible accidents.
- Pay attention when you work with the machine and act with common sense.
DO NOT SUBMERGE OR RINSE THE MACHINE WITH WATER.
DO NOT INTRODUCE ANIMALS INSIDE THE MACHINE.
DO NOT INTRODUCE SILVER PIECES IN THE MACHINE.
DO NOT MIX COPPER PIECES WITH OTHER MATERIALS INSIDE THE MACHINE, KEEP THE COVER DOWN
WHEN THE MACHINE IS WORKING, BE SURE THE BASKET TRAY IN THE UPPER LOADING POSITION.
KEEP CHILDREN AT DISTANCE.
The machine should be operated by qualified staff; it can only be operated
by adult people. Do not allow children to use or play with it. Pay special attention when
the machine is working.
PROTECT YOURSELF AGANIST ELECTRICAL SHOCKS
. Try to avoid the contact between the machine and the
electrical conductive materials. The machine has to be always with a protection isolator in contact with
other materials.
THE REGULATION, CONSERVATION, REPAIR AND CLEANING OPERATIONS OF THE MACHINE
HAVE TO BE CARRIED OUT WITH THE MACHINE STOPPED AND DISCONNECTED FROM THE NET
. If you
haven´t been using the machine for a long time and before proceeding to the maintenance or the
substitution of a piece disconnect it from the net.
CONNECTION CABLE FOR EXTERNAL USE. Only use marked and approved CE wires.
THE REPAIRS WILL ONLY BE CARREID OUT BY A SPECIALIST
. This electric machine has been manufactured
executing the rules that official organisms demand. The repairs can only be carried out by a specialist;
otherwise accidents can happend.
CONTROL IF THE MACHINE HAS ANY DETERIORATION.
- All the components should complete CE requirements and approvals to guarantee the perfect working of
the machine.
- Any deteriorated piece, switch or feeding cable will be changed or repaired by a post-sale service workshop,
or by qualified staff to avoid any danger.
EN
19
