5. WARNING
6. INSTALLATION
EXAMINE THE MACHINE TO CHECK IF IT HAS SUFFERED SOME DAMAGE DURING TRANSPORT. If
it would be necessary make a complait or reclamtion to the transport company.
Read the instructions carefully before using the machine and keep them for future references. The
manufacturer declines all responsibilitiy if the standards of the manual are not respected.
This machine is a decarboniser for kitchen tools.
This machine should be only used for the purpose for which it has been designed. Any other use is
inappropriate and therefore dangerous. The manufacturer will not be responsible for any damage caused
by inappropriate use.
Before installing and using the machine read carefully this instruction manual.
The manufacturer will be able to introduce technical or aesthetic changes without previous notice.
A wrong installation may damage the machine. Please note the following during initial installation and
whenever tha machine is moved.
1. UNPACKING
- Remove the strips ans polystyrene piece that cover completely the machine.
- Take the machine down from the pallet that is used for transport.
3.- ELECTRICAL CONNECTION
.
AVOID ALL ACCIDENTAL GROUND STARTING. Before connecting the machine, verify that all the elements of
the machine are properly placed; otherwise it could cause a breakdown.
. CHECK THAT VOLTAGE OF ELECTRIC NETWORK is the same as the one shown in the identification sheet of
the machine.
2. LOCATION
- Place the machine in a completely smooth surface to get the best working.
- Once you have done it, put the brakes of the front wheels on to avoid any type of movement. Disable
the brakes every time you want to move the machine.
- We just need bring the machine near a drainage to clean it and change the material, not during the
normal working.
EN
15
