frost-trol ALBORAN BM, Руководство по установке и обслуживанию

Страница: 13 / 23

INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
ALBORAN BM
SOLID LINES
Versión: -1 -13-
Symbol IEC60417-5021
Use a chord with a nominal section of until 10mm
2.
2.6. CONNECTION TO THE WATER SUPPLY NETWORK
The cabinet is equiped with a water inlet with an automatic filling valve situated in
the lower part of the appliance. For accessing it, it is necessary to diassemble the
rear plinth covers.
Once the pipe is connected to the water supply network, make sure to open the
valve in order to let the cabinet fill up automatically.
2.7. HANDELING HALOGEN LAMPS
This display cabinet has infrared quartz halogen lamps. For instructions for its
installation, follow the recommendations and Chapter 4.
2.8. CLEANING
Before the first use, it’s mandatory to clean the unit thoroughly, both inside and
out, with non-abrasive detergents and rinse well with water. Dry the inside with a
cloth so that no water remains inside the unit (see Chapter 4).