FrontRow symbio 5201R, Руководство по установке

Страница: 15 / 28

13
5
Install the Ceiling Sensor
Mounting style #1:
Suspended ceiling T-bar rail moun
t
1. Lift ceiling tiles away from T-bar support.
2. Route ceiling sensor pigtail cord above
ceiling tiles and connect sensor cable.
3. Twist ceiling sensor & bracket so the
bracket tabs are resting on top of the
T-bar. Drop ceiling tiles in place.
4. Connect the IR sensor cable to the ceiling
sensor pigtail above the ceiling tiles.
5. Route sensor cable above ceiling tiles
toward your receiver location, following
guidelines in chapter 4 and all applicable
building and electrical codes.
NOTE: Ensure cables are installed in
adherence to local and national electric
codes. Sensor cables should not rest on
the ceiling. Lift them off the ceiling and
use cable/zip ties to secure them loosely
to beams, anchor bolts, or other support
structures in the ceiling (do not attach
them to duct work, plumbing, or other
secondary work).
1
IMPORTANT!
DO NOT ALTER THE IR SENSOR CABLE
Read the FrontRow Installer Guide thoroughly
before installing sensor cable. The cable has
been rigorously tested and qualified to work
with your FrontRow IR sensors.
• Do NOT shorten
• Do NOT alter or replace the RCA connectors
• Do NOT "splice" or split the cable
• Do NOT use a "Y" adaptor
• Do NOT use any other type of cable
Altering the cable in any way will result in
decreased performance of your system and will
void your Manufacturer's Limited Warranty.
!