FrontRow Pro Digital, Руководство по установке

Страница: 26 / 33

23
Step 8:
Install sensors
(If you are using IR Speakers, skip to step 9)
Estimated time for this step: 10 minutes
You’re almost done.
CEILING SENSOR
If you’re installing a ceiling sensor and have an acoustic tile
ceiling (or “drop ceiling”):
1. Locate the tile you marked in Step 2 for sensor placement.
2. Slide and twist the ceiling sensor bracket onto the T-bar rail
until it rests on the rail or mount directly to the ceiling tile if
not using the T-bar supports.
3. Attach the sensor to the cable leading to the receiver.
4. Replace the ceiling tile, making sure that the sides
of the tiles prevent the sensor bracket from twisting.
If you’re installing a ceiling sensor and have a
sheetrock ceiling:
1. Locate the spot you marked in Step 2 for sensor placement.
2. Mount the ceiling sensor directly to the sheetrock
ceiling using the screws provided.
3. Attach the sensor to the cable leading to the receiver.
NOTE:
If removing the bracket to mount sensor directly
to metallic surface, use only non-metallic fasteners and
supplied nylon washers to isolate sensor from surface.
Failure to do so can introduce noise or damage
the system.
ceiling sensor features
1
2
mounting screws
1
ceiling tile mount bracket
2
T-bar support rail
ceiling tile mount