FrontRow Pro Digital, Руководство по установке

Страница: 18 / 33

With the positions of all your major components settled, you can now install your receiver.
1. Install optional receiver tray to wall at teacher
eye-level according to installation instructions
included with tray.
2. Place receiver on tray.
3. Slightly loosen tightening knob and angle main
sensor toward center of room, and tighten knob.
4. Plug power supply into receiver.
5. Plug power supply into wall socket.
6. Connect any other teaching technology —
TV / VCR / DVD, teacher’s computer, etc. —
to your
F
ront
r
ow
P
ro
D
igital
system through the
Aux Input jacks (cables supplied).
15
940R (Back)
6
5
4
1
2
3
eye level of teacher
Step 5:
Install the receiver
Estimated time for this step: 15 minutes
The receiver has a built in sensor that works like the ceiling or wall sensors. To maximize the reception of the
internal sensor, it must be mounted so it can “see” as much of the room as possible.
a. Place the receiver at the instructors eye level (approximately 5-6 ft. [1.5-2m] from the floor). The receiver may
be placed on a shelf, however we recommend using the FrontRow receiver tray.
b. If mounted less than 5 ft. (1.5m) from the floor, the receiver should be mounted parallel to the floor. If mounted
6 ft. (2m) or higher from the floor, the receiver should be angled downward slightly.
c. Ensure the receiver is installed to comply with ADA standards.
d. Secure the receiver tray to ensure it can’t easily be rotated or angled into a less than optimal position.
e.
DO NOT
place the receiver in direct sunlight as it will greatly reduce performance.
f. DO NOT bundle the FrontRow power supply (or any power supply) along with the speaker or sensor cable.
f. DO NOT bundle the FrontRow power supply (or any power supply) directly next to OR on top of
the receiver.