P a g e
|
3
HARDWARE DESCRIPTION
The USB ComProbe II hardware is used for external data monitoring. The USB ComProbe II is a high
speed, full speed, and low speed USB 2.0 protocol analyzer that sends data using a high speed USB 2.0
connection.
The front of the analyzer has three USB connections: one for the device being tested, one for the PC the
device is normally connected to, and one digital I/O port (Figure 1a).
Figure 1a – Front Panel
The back panel has one USB connection labeled "Analysis PC" for connecting the USB ComProbe II to the
computer running FTS4USB (Figure 1b).
Figure 1b – Back Panel
There are three LED’s on top of the ComProbe (Figure 1c).
Figure 1c – LED's
