.
Assembly Instructions
48190A Carlisle Balcony Swivel Stool
ATTENTION:
1. Please read this instruction carefully before assembly.
2. Aluminum is soft metal, over tightening may strip threads or break the part.
3. Do not use power tools.
Assembly steps:
3.
Dismantle bolts (C), flat washers (D), lock washers (E) and nuts (F) from lower part (B). Position upper part
(A) upside down on a soft clean surface with the arms on the floor. The screw holes on the crossbar and
lower part (B) should be aligned at each other.
4.
Insert bolts (C) into the crossbar on upper part and crossed TR on lower part. Attach flat washers (D), lock
washers (E) to bolts (C). Then attach nuts (F) to bolts (C). Don’t tighten.
3. Tighten all the bolts completely after being put in place with outer hexagonal wrench (G). This is the
outlook of the assembled balcony swivel stool.
Care & Maintenance:
Please do not use acid or alkaline washing liquid to clean the product. We recommend
a mild dish soap and warm water for best cleaning results on the metal frames and fabrics.
Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at
1-800-537-8484 or email:[email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m .EST
or Saturdays 9:30 a.m. to 6:00 a.m.
Parts
Picture
Description
Qty
Parts
Picture
Description
Qty
A
Upper Part
1
C
Bolt
4
B
Lower Part
1
D
Flat Washer
4
E
Lock Washer
4
F
Nut
4
G
Outer Hexagonal
Wrench
（
M8
）
1
