4
(
)
Prepare Wiring Suggested Method ... CONT
Strip one end of the insulation on the red wire from Step 2C back 5 mm and crimp the Flag Terminal (Item
18) to the wire as shown below.
(
)
D
REV_A03
Strip insulation back 5 mm
Red wire from Step 2D
Crimp
Crimp
(
)
E
Fit an Insulating Boot (Item 19) over the crimped Flag Terminal as shown below.
(
F
)
Insert the Rubber Grommet (Item 20) into the whole in the Electrical Cover (Item 13) as shown