14
-
install Floodlight Slimline Rack
REV_A03
(
)
A
Place the Floodlight Bracket over the side of
the rack (Hella Plug cut-outs facing down)
in the desired position. Mark the position of
hole set "A" or "B" onto the side of the
Rack. Remove the Floodlight Bracket and
drill a 6 mm hole on each of your two
markings.
Place the Floodlight Unit onto the Rack (Hella Plugs facing down), lining the holes in the Floodlight Unit
up with the holes drilled in Step 7A. Secure the Floodlight Unit to the Rack using two M6 x 20 Button Head
Bolts, Four M6 Flat Washers and two M6 Nyloc Nuts (Items 3, 6, 12). The Nyloc Nuts and two of the
Washers go on the inside of the Rack. Once Secure place a M6 Nut Cap (Item 12) over each of the Nyloc
Nuts.
(
)
B
Complete Steps 3A to 3H (Pages 7-9).
(
C
)
Congratulations, you have completed your installation. Take a step back and admire your work. Good
Job!
(
C
)