Fronius TransTig 170, Руководство по эксплуатации

Страница: 28 / 100

28
Item Name
(1)
Special indicators
HF ignition indicator (high frequency ignition)
Illuminates when the "IGn" setup parameter has been set to "on"
Tacking indicator
Illuminates when the "tAC" setup parameter has been set to a period of time
Pulsing indicator
Illuminates when the "F-P" setup parameter has been set to a pulse frequen -
cy
Spot welding indicator
Illuminates when the "SPt" setup parameter has been set to a spot welding
time
(2) Special indicators
Remote control indicator
Illuminates when a foot-operated remote control is connected
Electrode overloaded indicator
Illuminates when the tungsten electrode is overloaded
Further information relating to the "electrode overloaded" indicator can be
found in the "TIG Welding" section of the "Welding Mode" chapter
CEL indicator
Illuminates when the "CEL" setup parameter has been set to "on"
Trigger indicator
Illuminates when the "tri" setup parameter has been set to "off"
(3) Welding current display
To display the welding current for the parameter
- Starting current I
S
- Welding current I
1
- Lowering current I
2
- Final current I
E
Before the start of welding, the left digital display indicates the set value. For I
S
, I
2
,
and I
E
, the right digital display also indicates the % amount of the welding current
I
1
.
After the start of welding, the left digital display indicates the current actual value
of the welding current.
The relevant parameters in the welding process are shown by the illuminated seg -
ment in the welding parameter overview (10)
(4) Left digital display