Fronius TransTig 170, Руководство по эксплуатации

Страница: 21 / 100

21
EN
-U
S
General
Device Concept
The TransTig 170 and TransTig 210 TIG
power sources are microprocessor-control -
led inverter power sources.
A modular design and easy ability to extend
the system guarantee a high degree of fle -
xibility.
The power sources are generator-compati -
ble and are equipped with protected opera -
ting elements and a robust plastic housing.
As a result of the simple operating concept,
key functions can be quickly viewed and
adjusted.
The power source can also be operated via the standard TIG Multi Connector with various
remote controls or an Up/Down torch.
The TIG pulsed arc function means that the power source offers a wide frequency range.
Additionally, the power source offers "Power Factor Correction", meaning the current con -
sumption of the power source adapts to the sinusoidal grid voltage. This results in advan -
tages such as:
- Low primary current
- Low conductivity losses
- Late tripping of the power circuit breaker
- Improved stability during voltage fluctuations
- Compatibility with long grid leads
- Consistent input voltage range with multivoltage devices
Operating Princi -
ple
The central control unit of the power source controls the entire welding process.
During the welding process, actual values are continually measured and any changes are
immediately responded to. Control algorithms ensure that the desired status is maintained.
This results in:
- A precise welding process,
- A high degree of reproducibility on all results
- Excellent weld properties.
Applications The power source can be used in repair and maintenance for production and manufactur -
ing tasks.
Remote Control
Operating Mode
The TransTig 170 and TransTig 210 power sources can be operated using the following
remote controls:
- RC Bar 1P
- RC Panel MMA
- RC Pedal TIG
- RC Panel Basic TIG