Fronius TransSteel 3500, Руководство по эксплуатации

Страница: 38 / 60

38
Connecting the mains cable
General If no mains cable is connected, a mains cable that conforms to the requisite connection
voltage must be fitted before commissioning.
A strain-relief device for the following cable cross-sections is installed on the power source:
*) Canada/US cable type: Extra-hard usage
Strain-relief devices for other cable cross-sections must be designed accordingly.
Stipulated mains
cables and strain-
relief devices
*) Canada/US cable type: Extra-hard usage
The item numbers of the different cables can be found in the spare parts list towards the
end of the document.
A merican w ire g auge
Connecting the
mains cable
If no mains cable is connected, a mains cable that is suitable for the connection voltage
must be fitted before commissioning.
CAUTION!
If no ferrules are used, there is a risk of injury and damage from short circuits be -
tween the phase conductors or between the phase conductors and the PE conduc -
tor.
Fit ferrules to all phase conductors and the PE conductor of the stripped mains cable.
The PE conductor should be approx. 10 - 15 mm (0.4 - 0.6 in.) longer than the phase con -
ductors.
Power source Cable cross-section
Canada/US Europe
TSt 3500 AWG 12 *) 4G2.5
TSt 5000 AWG 10 *) 4G4
TSt 3500 MV AWG 10 *) 4G4
TSt 5000 MV AWG 6 *) 4G10
Power source Mains voltage Cable cross-sec -
tion
Canada/US
Europe
TSt 3500 3 x 380 / 400 V AWG 12 *) 4G2.5
3 x 460 V AWG 12 *) 4G2.5
TSt 5000 3 x 380 / 400 V AWG 8 *) 4G4
3 x 460 V AWG 10 *) 4G4
TSt 3500 MV 3 x 208 / 230 / 400 /
460 V
AWG 10 *) 4G4
TSt 5000 MV 3 x 208 / 230 / 400 /
460 V
AWG 6 *) 4G10