manualshive.com logo in svg

Fronius TransSteel 2200, Руководство по эксплуатации

Поделиться
Скачать
Fronius TransSteel 2200 Скачать руководство пользователя страница 27

Description of the
warnings on the
device

Warning notices are attached to the device for certain device versions.

The arrangement of the symbols may vary.

A

B

!

Warning! Caution!
The symbols represent possible dangers.

A

Drive rollers can injure fingers.

B

The welding wire and drive parts are under welding voltage during operation.
Keep hands and metal objects away!

1.

An electric shock can be fatal.

1.1

Wear dry, insulating gloves. Do not touch the wire electrode with bare hands. Do
not wear wet or damaged gloves.

1.2

Use a base that is insulated from the floor and work area to protect against elec-
tric shock.

1.3

Before working on the device, switch off the device and remove the mains plug or
disconnect the power supply.

2.

Inhalation of welding fumes can be harmful to health.

2.1

Keep your face away from any welding fumes.

2.2

Use forced-air ventilation or local extraction to remove welding fumes.

2.3

Remove welding fumes with a fan.

27

EN-US

Содержание TransSteel 2200









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды