Fronius TPS 4000, Руководство по установке

Страница: 12 / 20

12
Mounting the sec-
ond earthing
socket at the rear
Mounting the second earthing socket
Mount the rear (-) current-socket (1),
complete with its blanking cap (9):
- Insert the rear (-) current-socket
(1), working from the outside to-
wards the inside
- Insert insulating washer
- Screw on the hexagonal nut
- Tighten the hexagonal nut with the
torque wrench, width 32
- Thightening torque 35 Nm
IMPORTANT! The recess in the current so-
cket must point downwards.
Threading in the cable
Thread the cable (8) through the rub-
ber lead-throughs (f) and (g)
Connecting the cable to the front current socket
Connect the cable to the front current
socket (1):
- Put the belleville spring washer (i)
over the hexagon head screw (h)
- Put the star (j) over the hexagon
head screw (h)
- Put the cable lug of the cable (8)
over the hexagon head screw (h)
- Put the cable lug of the existing
current cable (k) over the hexagon
head screw (h)
- Screw the hexagon head screw
(h) into the current socket
- Tighten the hexagon head screw
(h) with the torque wrench, width
19
- Thighting torque 15 - 35 Nm
(1+9)
(3)
1
(g) (f) (8)
2
(8)
(k)
(h)
Housing
(2)
(j)
(i)
(1)
(3)
3