-
Load configuration
Loads onto the device one of the suitable device configurations stored on the USB
flash drive
-
Load dealer text
A text file can be loaded from the USB flash drive that is displayed as soon as the
device enters an error state. The text file can, for example, contain the contact
details of the dealer. The file must be saved on the USB flash drive as a ".txt" file in
"unicode" format. The file name must be "dealer.txt". The number of characters is
restricted to 99.
*
If a USB flash drive is connected while charging is in progress, the .csv files are
saved directly to the USB flash drive. The folder structure here is also created
automatically and differs due to the presence of the "Datalog" folder instead of the
"Charges" folder.
Status codes
If a fault occurs during operation, specific status codes may be displayed. Faults can res-
ult from the following:
-
Battery fault
-
The voltage of the connected battery is unsuitable.
-
The device has overheated.
-
There is a software or hardware fault.
Battery fault:
If the battery signals a fault, the charger displays this fault as a battery fault including the
corresponding fault number for the battery. The respective fault is explained in the bat-
tery's Operating Instructions.
If an error message appears on the display and if you cannot resolve the error yourself:
1
Note the displayed status code: e.g. "Statecode (31)".
2
Note the configuration of the device.
3
Contact your authorised service centre
Freely-defined text, which could for example include the contact details of the distrib-
utor, can be displayed if the device is in an error state.
47
EN
