Fronius Robacta Reamer V Скачать руководство пользователя

Страница: 42 / 104

Attach the spatter tray retainer as shown

Screwing the
cleaning device
to the underlying
surface

WARNING!

Danger from machines falling or toppling over.

This can result in serious injury and damage to property.

▶

Always secure the cleaning device to the underlying surface.

▶

If the underlying surface thickness is less than 5 mm (0.197 in.), use the fixings sup-
plied with the cleaning device for fastening.

▶

If the underlying surface thickness is greater than 5 mm (0.197 in.), do not use the
fixings supplied for fastening. In this situation the installer is responsible for selecting
the right type of fixing.

Place the cleaning device and the spatter tray retainer on a level, firm and vibration-
free surface (foundation).
-

Position the cleaning device in such a way that the distance the robot has to
travel to the cleaning position is as short as possible.

Place components on the underlying surface and secure

Содержание Robacta Reamer V









































































































Результаты поиска

Содержание Robacta Reamer V

Отзывы:

Похожие инструкции для Robacta Reamer V

Бренды по названию

Популярные бренды

Fronius Robacta Reamer V, Руководство по эксплуатации

Результаты поиска

Содержание Robacta Reamer V

Отзывы:

Похожие инструкции для Robacta Reamer V

Бренды по названию

Популярные бренды