Safety
Safety
Observe the following safety rules for all work described in the "Installation and
commissioning" section.
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
All activities described in these Operating Instructions may only be carried
out by trained and qualified personnel.
▶
All functions described in these Operating Instructions may only be used by
trained and qualified personnel.
▶
Do not carry out any of the work or use any of the functions described until
you have fully read and understood the following documents:
these Operating Instructions,
all the Operating Instructions for the system components, especially the
safety rules.
WARNING!
Risk of machines starting automatically!
This can result in serious injury and damage to property.
▶
In addition to these Operating Instructions, also observe the safety rules is-
sued by the manufacturer of the robot and welding system.
▶
Ensure that all protective measures have been taken and will remain in place
while you are in the working area of the robot.
WARNING!
Danger from mechanically powered parts, flying parts (shavings, etc.) and com-
pressed air/parting agent mixture escaping from the parting-agent injection
nozzle.
This can result in severe injuries.
▶
Before carrying out any work on the cleaning device or the connected system
components, disconnect the customer's compressed air and power supplies
from the cleaning device and the connected system components, and ensure
that they remain disconnected until all work is complete.
IMPORTANT!
Observe the following section "Ensuring that the cleaning device is
depressurised".
29
EN
Содержание Robacta Reamer V Twin
