background image

Safety Instructions

Explanation of
Safety Instruc-
tions

DANGER!

Indicates an immediate danger.

Death or serious injury may result if appropriate precautions are not taken.

WARNING!

Indicates a possibly dangerous situation.

Death or serious injury may result if appropriate precautions are not taken.

CAUTION!

Indicates a situation where damage or injury could occur.

Minor injury or damage to property may result if appropriate precautions are not
taken.

NOTE!

Indicates the possibility of flawed results and damage to the equipment.

General

The device has been manufactured using state-of-the-art technology and according to
recognized safety standards. If used incorrectly or misused, however, it can cause
-

injury or death to the operator or a third party,

-

damage to the device and other material assets belonging to the operating com-
pany,

-

inefficient operation of the device.

All persons involved in the commissioning, operation, maintenance, and servicing of the
device must
-

be suitably qualified,

-

have knowledge of automated welding and

-

have read these Operating Instructions and any system component operating
instructions in full and follow them carefully.

The Operating Instructions must always be at hand wherever the device is being used. In
addition to the Operating Instructions, all applicable local rules and regulations regarding
accident prevention and environmental protection must also be followed.

All safety and danger notices on the device must
-

must be kept in a legible state

-

not be damaged/marked

-

not be removed

-

not be covered, pasted, or painted over

For the location of the safety and danger notices on the device, refer to the section
headed "General" in the Operating Instructions for the device.
Before switching on the device, remove any faults that could compromise safety.

Your personal safety is at stake!

5

EN-US

Содержание Robacta Reamer Braze+





































































Отзывы: