CAUTION!
Danger from escaping cleaning or Print electrolyte!
Personal injury and damage to property may result.
▶
Observe the safety data sheets of the cleaning and Print electrolytes
▶
Always screw the cleaning electrolyte onto the cleaning torch with the opening fa-
cing upwards
▶
Use protective equipment according to the safety data sheet of the cleaning or Print
electrolytes used
▶
Make sure that the cleaning or Print electrolyte does not come into contact with
clothing or body parts
CAUTION!
Danger from spilled, leaked or uncol-
lected chemicals!
Personal injury and damage to property or
the environment may result.
▶
For cleaning, polishing or Print work,
provide an acid-resistant drip tray.
▶
Make sure that cleaning or Print elec-
trolytes cannot escape in an uncon-
trolled manner.
CAUTION!
Danger from live cleaning electrodes, cleaning brushes, and Print electrodes!
Damage to the workpiece and cleaning electrode or Print electrode may result.
As soon as the mains cable of the MagicCleaner 150 is connected to the grid and the
device is switched on, current flows through the cleaning electrode, cleaning brush or
Print electrode.
▶
Store the cleaning or Print torch in an insulated place, e.g. in the cleaning torch hold-
er!
CAUTION!
Risk of injury from hot workpiece surfaces and hot cleaning or print electrodes!
Workpiece surfaces, cleaning electrodes, and Print electrodes can reach temperatures of
over 100 °C / 212 °F during operation. This can result in burns.
▶
Do not touch workpiece surfaces, cleaning and Print electrodes during operation
▶
Only touch workpiece surfaces, cleaning and Print electrodes when they have
cooled down
21
EN-US
