The device must be examined at least once a week for externally detectable damage
and functionality of the safety devices.
Only Fronius cleaning and Print electrolytes are suitable for use in our devices.
Do not mix Fronius cleaning and Print electrolytes with other cleaning agents.
If damage occurs due to the use of other cleaning agents, the manufacture is not liable
for this and all warranty claims are forfeited.
Transport the cleaning and Print electrolytes in closed original containers exclusively.
Commissioning,
maintenance and
repair
It is impossible to guarantee that externally procured parts are designed and manufac-
tured to meet the demands made on them, or that they satisfy safety requirements.
-
Use only original spare and wearing parts (also applies to standard parts).
-
Do not carry out any alterations, installations, or modifications to the device without
first obtaining the manufacturer's permission.
-
Components that are not in perfect condition must be changed immediately.
-
When ordering, specify the exact name and part number according to the Spare
Parts List, as well as the serial number of your device.
In addition to a cable connection, the housing screws provide the protective conductor
connection for grounding the housing parts.
Always use original housing screws in the appropriate number with the specified torque.
Safety inspection
The manufacturer recommends that a safety inspection of the device be performed at
least every 12 months.
A safety inspection by a certified electrician is recommended:
-
After changes
-
After alterations
-
After repair, service and maintenance
-
At least every twelve months.
For the safety inspection, follow the appropriate national and international standards and
guidelines.
You can obtain more information about the safety inspection from your service center.
The service center will provide the necessary documents upon request.
Safety Symbols
Devices with the CE mark satisfy the essential requirements of the low-voltage and elec-
tromagnetic compatibility directives (e.g., relevant product standards of the EN 60974
series).
Devices marked with the CSA test mark satisfy the requirements of the relevant stand-
ards for Canada and the USA.
Copyright
Copyright of these Operating Instructions remains with the manufacturer.
Text and illustrations were accurate at the time of printing. Fronius reserves the right to
make changes. The contents of the Operating Instructions shall not provide the basis for
any claims whatsoever on the part of the purchaser. If you have any suggestions for im-
provement, or can point out any mistakes that you have found in the Operating Instruc-
tions, we will be most grateful for your comments.
11
EN-US
