Fronius FK 4000, Руководство по эксплуатации, Страница: 30 / 52

Connecting the cooling unit to the power source
Safety
WARNING!
Danger from electric current.
An electric shock can be fatal.
▶
Turn the power source mains switch to the "O" position.
▶
Disconnect the power source from the mains.
▶
Ensure that the power source remains disconnected from the mains until all work
has been completed.
Connecting the
cooling unit to
the power source
(1)
(5)
(*
1
Insert the M5 nuts provided (5) into
the hexagon-shaped openings on the
fixing bars (1) from the inside
2
Unscrew the TX 25 screws from the
protective cover on the underside of
the power source and remove the pro-
tective cover (if present)
(* Cooling unit scope of supply
(3)
(2)
3
Pull the power source connector (2) as
far out of the power source as pos-
sible
4
Position the power source above the
cooling unit
5
Connect the power source connector
(2) to the cooling unit connector (3)
CAUTION!
Risk of short circuit from kinked or damaged cables.
When positioning the power source, ensure that the cable is not kinked.
30