39
EN
5.
Select the desired setting, e.g.: „Size“ for the tank
size (L)
6.
Press the „OK“ key to confirm
7.
Use the „left“ / „right“ keys to move the cursor to the
first position to be changed
8.
Use the „scroll“ key to change the value of that
position
The tank pressure „p-Input“ (bar) and the temperature of the tank „T-Input“ (°C) can be
detected via the external analogue sensor inputs AI0 and AI1. Configuration of the
external analogue sensor inputs is described in the next section.
The „NC“ entries for the „p-Input“ and „T-Input“ settings mean that the corresponding
sensor inputs are not yet selected.
Configuration of
the tank indicator
(continued)
9.
Use the „left“ / „right“ keys to move the cursor to the
next position and continue as described above until
the entire input value has been changed
10. Press the „OK“ key to confirm
11. Repeat as appropriate for the „p-max“ setting
(maximum tank pressure)
12. To configure external analogue sensor inputs, see
the next section „Configuring external analogue
sensor inputs“
13. Select the „p-Input“ setting
14. Press the „OK“ key to confirm
15. Use the „scroll“ key to select the required sensor input for the tank pressure, e.g.
„AI0“
16. Press the „OK“ key to confirm
17. Repeat as appropriate for the „T-Input“ setting, e.g. with sensor input „AI1“
Save the current setting:
18. Hold down the “OK” key (1 second)
