38
Configuration of
the tank indicator
To do this,
1. Select the „SETUP“ button from the Favourites
display
The following input values appear:
-
„Size“ ... Total volume of all H
2
tanks (L)
-
“p-max” ... maximum filling pressure of the H
2
tanks
(bar)
2.
Select the symbol for the H
2
tank
3.
Press the „OK“ key to confirm
Changing the
favourites
1. See the „Displaying measured values“ section, e.g.
„TAout“, for how to navigate to the required value
2. When you have selected the value, press the „OK“
key
To select and arrange the values for the Favourites display:
The window for arranging the Favourites display opens
3. Use the „scroll“ key to determine the position of the
selected value
4. Press the „OK“ key to save this arrangement
5. Select the „EXIT“ button
6. To select and arrange other values, continue as
described for „TAout“.
You will need to specify the following in order to correctly display the remaining hydro-
gen level:
-
Total volume of all H
2
tanks (L)
-
Maximum filling pressure of the H
2
tanks (bar)
A display appears. This currently contains the entries
„NC“ and „NA“. However, if the tank display and ana-
logue sensor inputs are configured and suitable sensors
are connected, as described below, the following tank-
specific measured values will be listed:
-
current filling pressure
-
current tank temperature
-
calculated energy content of the current fill level
4. Press the “OK” key
