P380 Pneumatic Strapping Tool Operation Manual | FPA001 | Apr 2018 | Page 6
3.5 Inserting the Lower Strap
Lift and hold the handle lever with the right
hand. The left hand inserts the free end of the
strap.
First between welding gripper and the welding
stop gripper and then under the stop gripper
until it hits the strap stop.
Make sure that the strap is well aligned to both
strap stops!
With the thumb move the seesaw lever up. The
strap is locked.
Do not release the handle lever.
3.6 Inserting the Upper Strap
The left hand inserts the upper strap under the
welding gripper, over the stop gripper and
between tensioning wheel and sliding jaw until it
hits the strap stop.
Pull on the strap until the strap sling touches the
package.
Release the handle lever
The strap guides close and the tensioning wheel
will move down to the strap.
3.7 Tensioning the Strap
Press down the tensioner valve lever and then
release it again after the desired strap tension
has been reached.
The tensioning operation can be interrupted and
restarted at any time.
Seesaw lever
Lower strap
Stop gripper
Upper strap