FROMM
FS4.1333-Manual-32.11XX.XXX.V04-EN08_R2.doc
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
34
WRAPPING PROGRAMS
Below parameters have to be set at first installation. (Can only be changed by FROMM service)
Double wrapping. PA08 - 1.
The UP/DOWN (double) wrapping program will be executed with this function.
- After completing the pre-selected number of bottom wraps the film carriage will go upwards;
- While the turntable keeps turning, it will halt automatically at the top, to apply the pre-selected top
wraps;
- After this the carriage will go downwards again;
- After reaching the switch for the carriage ZERO position, the turntable will halt in phase;
- The film can be cut at the bottom and the pallet can be transported.
Single wrapping PA08 - 2.
The ONLY UP (single) wrapping program will be executed with this function.
- After completing the pre-selected number of bottom wraps the film carriage will go upwards;
- While the turntable keeps turning, it will halt automatically at the top, to apply the pre-selected top
wraps;
- Now the turntable will halt in phase;
- The film can be cut on the top and the pallet can be transported.
