FROMM
FS4.1333-Manual-32.11XX.XXX.V04-EN08_R2.doc
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
32
BASIC OPERATING INSTRUCTIONS
Button
Explanation
START button
Automatic run mode
Activate this run mode, after the machine has been turned on and the safety
conditions have been complied with, by pressing the START pushbutton provided
that the corresponding work cycle has been set.
Automatic program : LED is OFF
Manual program
: LED is blinking
STOP button
For stopping the machine so that it can restart from the operation point in which it
stopped. Pressing two times consecutively the operation point has been reset and
the next start will be from the beginning of the work cycle.
Press TWO times and the machine will stop immediate
Jog table, keep button pressed for the manual movement of the turntable
From software version 1.1:
Press button shortly and switch from AUTOMATIC to MANUAL program
Carriage movement jog button.
Press once to raise the carriage. Press again to stop the movement.
Or optional JOYSTICK ask your supplier!
Carriage movement jog button.
Press once to lower the carriage. Press again to stop the movement.
Press during the automatic cycle and the carriage will stop the movement during
activation of this button
Or optional JOYSTICK ask your supplier!
1. Reset button. Reset the machine to home position.
2. After switching on the machine clear error E2 the control voltage is activated
again.
Information button indicates the alarms
RE / FIND ZERO POSITON
Press stop and immediate after press reset and hold both buttons
for 5 seconds.
The turntable starts to rotate and stops at the next position.
ZERO POSITION CORRECT
– Proceed with working cycle
ZERO POSITION FALSE
– Repeat procedure (Max 3 times)
BA
S
IC O
P
E
RA
TIN
G
INSTRU
CTIOS
