FS1.2109-Manual 32.42XX.XXX.V01-V02-V03-EN08_R2.doc
FROMM
it is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
35
BASIC OPERATING INSTRUCTIONS
Button
Explanation
Automatic or manual mode selection.
By pressing the key, the machine will set in automatic or manual mode, the light
LED will indicate the selected mode
Program selection:
By pushing this button it will be possible to select a set program.
On the button the light switches ON when the function has been selected.
Display indication values of the selected settings
Or PA
– Parameters for FROMM Engineers only
Or ES
– Maintenance counter elapsed!!
Machine maintenance by FROMM service required!!
Check value maintenance counter under information button.
RE / FIND ZERO POSITON
Press stop and immediate after press reset and hold both buttons
for 5 seconds.
The turntable starts to rotate and stops at the next position.
ZERO POSITION CORRECT
– Proceed with working cycle
ZERO POSITION FALSE
– Repeat procedure (Max 3 times)
Push for increasing the displayed parameters
Push for decreasing the displayed parameters
START button
Automatic run mode with settable cycles
Activate this run mode, after the machine has been turned on and the safety
conditions have been complied with, by pressing the START pushbutton provided
that the corresponding work cycle has been set via the pushbutton panel.
In manual mode, the turntable starts
STOP button
For stopping the machine so that it can restart from the operation point in which it
stopped. Pressing two times consecutively the operation point is resetted and the
next start will be from the beginning of the work cycle.
After pressing this button in the manual program the turntable will return to home
“ZERO” position.
Press TWO times and the machine will stop immediate
BA
S
IC O
P
E
RA
TING
INSTRU
CTIOS