4-15
A385en-T2.man
11.2 Exchange of punch, dies and cutter
If in spite of a correct adjustment of the sealing depth and a correct oil level no proper sealless joint can be
accomplished the wear of the punch and the die halves must be examined.
Please proceed as follows:
•
Disassemble base plate completely.
•
Remove screws from punch and die halves.
•
Remove all single parts.
If the cutting edges are destroyed or worn heavily the respective parts must be replaced.
Attention! The cutting edges of the parts are slightly rounded also when they are new.
Attention!
Before mounting the parts they have to be cleaned carefully!
When mounting the base plate the screws N11.1106 and N1.1174 must be
tightened with 90 Nm (torque wrench).
N11.1106
N1.1174
Punch
Die half
Die half
Cutter
e
N1.1806
e
Loctite 222
e
N1.1303/04
