It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2003
FS 270 series
FROMM
GENERAL
•
This manual is only intended for a semi-automatic pallet stretch wrapping machine, FS 270 turntable
series with mechanical pré stretch 150% and automatic load height detection, as delivered by
FROMM Stretch Wrapping Division.
FS 270 Pallet height 2500 mm
FS 271 Pallet height 2800 mm
•
FOR EVERYTHING IN THIS MANUAL IS VALID, IF APPLIED!
•
This so-called turntable machine can be build into the floor.
A support frame for building the machine in the floor can be supplied as an option.
•
Pre- stretching (Stretching out) the film prior to application on the goods reduces the costs of
packaging and is easier on the environment. (Max 150% depending on quality stretchfilm)
Option gearings max 200% depending on guality stretchfilm
•
Refer to chapter 6 (Technical data), which describes the installation in detail and for the
complete size of the installation.
•
Information specific given to FS 271 is normally given in brackets ( ).
•
Read carefully at least the chapters 9 and 10 relating to handling and installation of this wrapping
machine.
•
For safety reasons the entire instruction manual should be read before setting in operation the
machine/installation, solving failures and executing maintenance.
•
We particularly draw your attention to the chapters 3 (Safety Instructions) and 4 (Warnings) which
point out the intended use and unsafe situations that could not be prevented in the design and
manufacture of the wrapping machine.
•
The duration of guarantee is provided the following are observed: the uses for which the machine
was designed, built and protected, in addition to recommendations, information - including matters of
general knowledge - details plus the safety and health technical limits notified to by the Manufacturer
to the User by virtue of the Operating, Use.
The same holds true if non-original spare parts are utilized.
•
For all the aforementioned reasons, we recommend that our customers always notify the Service
Department.
SERVICE DEPARTMENT
Please contact, in case of problems:
SPARE PARTS
Spare parts can be ordered from:
GENERAL
5
