Fröling FBR, Инструкция по установке и эксплуатации

Страница: 27 / 48

Installation | 4
M0741021_en | Installation and operating instructions Spring blade agitator FBR 27
r
Lubricate shaft stub incl. key with copper paste
r Push the geared motor (A) onto the screw end
r
Secure locking washer Ø 45 x 8 (B) to shaft stub
- 1x hexagonal screw M10 x 25
If the geared motor cannot be installed as shown above for reasons of space, it is
possible to turn the drive unit:
r
Fit the torque support with pin on the opposite side
r Turn the geared motor and torque support 180° and fit to the screw end and torque
support as explained above
Assembly with screw Ø150
r
Secure top part of gravity shaft (A) with seal (B) to the closed trough on the boiler
room side
- 4x hexagonal screw M12 x 35
r Secure flange plate (C) with seal (D) to top part of gravity shaft
- 4x hexagonal screw M12 x 35