11
SYNCHRONISATION OF WIRELESS 7-IN-1 SENSOR AND
INDOOR SENSOR(S)
Immediately after switching on, in synchronisation mode, the 7-in-1
sensor and the interior sensor are automatically coupled to the
console. Once your sensors are paired, the
The signal strength indicator of the sensors and the weather forecast
will appear on your console display.
BUILT-IN MEMORY
The console has a built-in FLASH memory where the most important
settings are stored. These include:
- Time zone, DST status, time SYNC status, WI-FI and weather
server settings, latitude /
Longitude, hemisphere setting, calibration values and sensor ID of
the sensor pair(s).
RESET AND RETURN TO FACTORY SETTINGS
To reset and restart the console, press the [ RESET ] key once. To
reset the console
and restore the factory settings, press and hold the [ RESET ] key
for 6 seconds.
RESYNCHRONIZING SENSORS
Press the [ SENSOR / WI-FI ] key once to switch the console to the
sensor synchronization mode,
and the console will re-register any sensors that have been
previously registered with it.
This means that the console will not lose the connection of the
sensors you paired previously.
BATTERY REPLACEMENT AND MANUAL SENSOR PAIRING
Whenever you have changed the batteries of the wireless indoor or
7-in-1 outdoor sensor, resynchronisation must be performed
manually.
Replace all batteries in the sensor with new ones.
Press the [ SENSOR / WI-FI ] key on the console to enter the sensor
synchronization mode.
