39
SETTING ALARM TIME
1 . In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm hour digit flashes to
enter alarm time setting mode.
2 . Press [ ˄ ] or [ ˄ ] key to change the value. Press and hold the key for quick-adjust.
3 . Press [ ALARM ] key again to step the setting value to Minute with the Minute digit flashing.
4 . Press [ ˄ ] or [˅ ] key to adjust the value of the flashing digit.
5 . Press [ ALARM ] key to save and exit the setting.
NOTE:
- In alarm mode, the “ Alarm ” icon will display on the LCD. - The alarm function will turn on automatically
once you set the alarm time.
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1 . In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds.
2 . When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or press [
ALARM ] key twice to activate the alarm with ice pre-alarm function.
Alarm off Alarm on Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30 minutes
earlier if the outdoor temperature is below -3°C.
When clock reach the alarm time, alarm sound will start. Where it can be stopped by following operation:
- Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next
day.
-By pressing [ SNOOZE ] key to enter snooze that the alarm will sound again after 5 minutes.
- By pressing and hold [ SNOOZE ] key for 2 seconds to stop the alarm and will activate again in the next
day
- By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
NOTE:
- The snooze could be used continuously in 24 hours. - During the snooze, the alarm icon “ ” will keep
flashing.
TEMPERATURE / HUMIDITY FUNCTION & TREND
Use the [ °C / °F ] slide switch to select the temperature display unit. The temperature / humidity trend
indicator shows the trends of changes in the forthcoming few minutes.
NOTE:
- When indoor temperature is below -40°C, the LCD will display “Lo”. If temperature is above 70°C, LCD
will display “HI”.
- When outdoor temperature is below -40°C, the LCD will display “Lo”. If temperature is above 80°C,
LCD will display “HI”.
- When humidity is below 1%, LCD will display “Lo”. If humidity is above 99%, LCD will display “HI”.
COMFORT INDICATION
The comfort indication is a pictorial indication based on indoor air temperature and humidity in an
attempt to determine comfort level.
NOTE:
- Comfort indication can vary under the same temperature, depending on the humidity.
- There is no comfort indication when temperature is below 0°C (32°F) or over 60°C (140°F).
WIRELESS SENSOR SIGNAL RECEIVING
1 . The console display signal strength for the outdoor unit.
2 . If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear.
The temperature and humidity will display “Er” for the corresponding channel.
