it. The channel name can be edited both in the app and on ecowitt.net (the
name edited in the app is not synchronised wit
should be edited separately on the device setup page on ecowitt.net).
If you want to use a new DP35 sensor to replace the old one (which is already
configured on a specific channel), please try the following:
1. open the Sensor ID page in the WS View app and locate your old sensor ID.
Switch off the old sensor and switch on the new sensor. 3.
On the Sensor ID page, click 'Register New'.
The new sensor will then be enrolled and the old sensor will be deleted.
View online data wi
When the Wi-Fi configuration is complete (to tell the DP1500 to connect to
your Wi-Fi network), your sensor data and the sensor's battery voltage
information will be displayed in the WS View app on the Live Data page.
Note:
Your smartphone and
viewing live data from your sensor in the WS View App. Live data refers to
actual data received from the DP1500 and is not stored in the WS View App.
However, the data is always transferred to and stored in the w
Cloud (under your registered account, and you can access it at any time via
your browser).
Set email alerts:
Once your device has been successfully added to the Ecowitt weather server,
you can set alerts for the sensor on the website to re
6
it. The channel name can be edited both in the app and on ecowitt.net (the
name edited in the app is not synchronised with the ecowitt.net website and
should be edited separately on the device setup page on ecowitt.net).
If you want to use a new DP35 sensor to replace the old one (which is already
configured on a specific channel), please try the following:
r ID page in the WS View app and locate your old sensor ID.
Switch off the old sensor and switch on the new sensor. 3.
On the Sensor ID page, click 'Register New'.
The new sensor will then be enrolled and the old sensor will be deleted.
View online data with WS View:
Fi configuration is complete (to tell the DP1500 to connect to
Fi network), your sensor data and the sensor's battery voltage
information will be displayed in the WS View app on the Live Data page.
Your smartphone and the DP1500 must be on the same network when
viewing live data from your sensor in the WS View App. Live data refers to
actual data received from the DP1500 and is not stored in the WS View App.
However, the data is always transferred to and stored in the w
Cloud (under your registered account, and you can access it at any time via
Once your device has been successfully added to the Ecowitt weather server,
you can set alerts for the sensor on the website to receive email notifications.
it. The channel name can be edited both in the app and on ecowitt.net (the
h the ecowitt.net website and
should be edited separately on the device setup page on ecowitt.net).
If you want to use a new DP35 sensor to replace the old one (which is already
r ID page in the WS View app and locate your old sensor ID.
The new sensor will then be enrolled and the old sensor will be deleted.
Fi configuration is complete (to tell the DP1500 to connect to
Fi network), your sensor data and the sensor's battery voltage
information will be displayed in the WS View app on the Live Data page.
the DP1500 must be on the same network when
viewing live data from your sensor in the WS View App. Live data refers to
actual data received from the DP1500 and is not stored in the WS View App.
However, the data is always transferred to and stored in the www.ecowitt.net
Cloud (under your registered account, and you can access it at any time via
Once your device has been successfully added to the Ecowitt weather server,
ceive email notifications.
