Up to 8 channels are supported.
console.
Use of Ecowitt Weather Server:
records and graphs on the website.
Receive email alerts from the server.
Remote monitoring with smartphone, laptop or computer by
website.
Setup (commissioning):
Inserting the battery
1. remove the battery compartment on the back of the transmitter by removing
the screw (see figure 2):
2. insert a 1.5 V AA battery (pay attention to the polarity: the flat side of the
battery must be against the spring side of the battery compartment).
The temperature reading
normally updated every 77 seconds (the sensor transmission update period).
Note: If no reading is displayed on the screen, make sure the battery is
inserted correctly or a proper reset has been performed.
is inserted correctly. Do not insert the battery upside down.
3. close the battery cover
3
Up to 8 channels are supported. The channel names can be edited on the
Use of Ecowitt Weather Server:View current temperature data, historical
records and graphs on the website.
Receive email alerts from the server.
Remote monitoring with smartphone, laptop or computer by visiting the
remove the battery compartment on the back of the transmitter by removing
the screw (see figure 2):
Figure 2: Inserting the battery
insert a 1.5 V AA battery (pay attention to the polarity: the flat side of the
battery must be against the spring side of the battery compartment).
The temperature reading is immediately displayed on the LCD screen and is
normally updated every 77 seconds (the sensor transmission update period).
Note: If no reading is displayed on the screen, make sure the battery is
inserted correctly or a proper reset has been performed. Make sure the battery
is inserted correctly. Do not insert the battery upside down.
close the battery cover
The channel names can be edited on the
View current temperature data, historical
visiting the
remove the battery compartment on the back of the transmitter by removing
insert a 1.5 V AA battery (pay attention to the polarity: the flat side of the
battery must be against the spring side of the battery compartment).
is immediately displayed on the LCD screen and is
normally updated every 77 seconds (the sensor transmission update period).
Note: If no reading is displayed on the screen, make sure the battery is
Make sure the battery
