Frizzlife PD800-TAM4, Руководство пользователя

Страница: 9 / 20

FRIZZLIFE INC.
www.frizzlife.com Page 7
Fig . 20
!
Note: Please make sure the tubings are fully
inserted, otherwise may result in water
leakage.
Cut another 1/4" tubing in proper length. Insert one end into the "Filtered"
port on the back of the system and connect the other end to the TAM4
filter.(Fig.20)
Step 7: Connect the "FILTERED" water tubing
Fig . 21 Fig . 22
Fig . 23
!
Note
：
Please note that the elbow fitting is not a must for the installation,
you don't have to use the elbow fitting if it's not necessary
!
Note: If your counter top or granite does not have an existing hole,
please drill one (1/2") before proceeding.
Remove the small blue clip on the "INLET" end and connect the 1/4"
tubing on it, make sure it hits the bottom of the fittings. (Fig.21)
Put back and lock the blue clip. (Fig.22)
Cut a 1/4" tubing again. Connect the "OUTLET" end with another 1/4
tubing in the same way. (Fig.23)
Follow the steps below and mount the faucet onto the sink top.
(Fig.24, Fig.25, Fig.26)
Mount the rubber and fasten the hand fixture underneath (Fig.27, Fig.28, Fig.29)
Connect the other end of 1/4" tubing from the "OUTLET" of TAM4 into the
1/4" quick fitting. (Fig.30, Fig.31, Fig.32)
Step 8: Connect TAM4 filter
Step 9: Install the drinking faucet
Model: PD800-TAM4