FRIULAIR PURESTREAM CWB FC, Руководство пользователя и по обслуживанию

Страница: 28 / 48

23
7425MUM661 Model: CWB FC - Use and Maintenance Manual Rev02
5.8 D
ISPLAY SOFTWARE RELEASE OF THE ELECTRONIC CONTROLLER
•
From the main screen press ENTER ;
•
Use the DOWN

key to reach the SER-Service menu, press ENTER ;
•
From the SER INF-Software info menu press ENTER

and the software version
installed on the control tool can be viewed;
•
To exit press ESC until the main screen is displayed.
5.9 D
ISPLAYING THE COMPRESSOR AND PUMP COUNTERS
•
From the main screen press ENTER ;
•
Use the DOWN

key to reach the HRS-Hour Counters menu, press ENTER ;
•
On the HRS COH-Compressors menu press ENTER , use the arrows to display the
hours of operation for the compressor;
•
To display the working hours of the pump from HRS menu, use the DOWN

key to
scroll down to the HRS EPH-Evaprator Pumps menu and press ENTER . From here
you can display the working hours of the pump (EP1);
•
To exit, Press ESC again until you return to the main screen.
5.10 A
LARMS
An alarm condition is signalled by the Alarm icon.
Some alarms must be rearmed manually while for others, the reset is automatic or semi-
automatic.
•
Manual reset: these alarms must be reset, which can only be done when the alarm
condition no longer exists; only then can the machine resume operation;
•
Automatic reset: the alarm is automatically deactivated as soon as the alarm
condition ceases and the machine restarts by itself. However, the signal (Alarm icon)
remains on the display until the alarm code is displayed;
•
Semi-automatic reset: semi-automatic alarms behave like automatic alarms; but if
the same semi-automatic alarm occurs 5 times in 90 minutes, that alarm becomes a
manual alarm; therefore to restart the machine, you will have to remove the cause of
the alarm and reset it.
5.10.1 Table of alarm codes
Alarm code Alarm description Type of rearm
A01 General alarm A
A02 Reverse phase protection A
A03 Evaporator flow switch alarm SA
AP1 Evap. pump/fan 1 overload alarm M
A07 Low air temperature alarm W
A09 High temperature warning A
A12 Cond fan/pump run hours exceeded A
AE1 Evaporator 1 ice alarm SA
AH1 Circuit 1 high pressure alarm M
AL1 Circuit 1 low pressure alarm SA
AM1 Circuit 1 high suct press alarm W
AV1 Circuit 1 vacuum alarm M