FRITZMEIER Umwelttechnik GmbH & Co. KG V1.6
15 / 29
Commissioning, assembly
ISARIA
®
3.1.4
Attaching the three-point attachment console to the vehicle
The three-point attachment console can be attached to the vehicle in two ways:
- Directly, at the three-point linkage
- Fitted on the fast coupler
Attaching the three-point attachment console to
the three-point linkage
• Park the vehicle on an even surface and secure
against rolling.
• Attach ball sleeves and bolts to the left and right
hitch lifting arms (95).
• Establish frictional connection between the
vehicle’s front hydraulics and both hitch lifting
arms (95).
• Establish frictional connection between the
vehicle's top link (96) (bolt) and secure.
• Continue with 3.3 Attaching the main frame.
Attaching the three-point attachment console to
the fast coupler
Tools required
- 2x engineer's wrench, 19mm
- Hex key, 8mm
• Place the three-point attachment console (3) onto
the fast coupler.
• Secure pawl (132) of the fast coupler using a
locking plate (129), for this purpose:
- Undo the locking screw (133).
- Fasten the adjusting screw (128) until the
locking plate is slightly pressed against the
pawl.
- Fasten counter nut (130) so that the adjusting screw cannot come loose.
- Fasten and counter locking screw (133).
Note
: The rolling and parking device (194) facilitates the processes of ISARIA
®
attached to it. Once
the three-point attachment console has been attached to the coupler, both rolling and parking
devices can be removed. To do so, open both clamping levers (192) and remove the square frame.
Both rolling and parking devices can also be inserted into the three-point attachment console from
above.
Fig. 13
